Thermal Spray Coating Plasma Spray Coating Arc Spray Coating Alunminium Spray Coating Surpersonic Flame Spray Coating Tungsten Carbide Powder Coating Hvof Hvaf

• Warranty: 1 Year
• Type: Coating Production Line
• Coating: Powder Coating
• Substrate: Steel
• Certification: CE, ISO
• Condition: New
• Model NO.: HV-8000
• Control Type: Full Closed-Loop PLC Control
• Input Power: 5000W
• Kerosene Pressure/Flow: 1.2MPa
• Oxygen Pressure/Flow: 1.6MPa
• Transport Package: Wood
• Specification: powder feeder, spray gun and control cabinet
• Trademark: Lijia
• Origin: Zhengzhou, China
• HS Code: 8424899990
• Production Capacity: 100/Year

Product Description

Component	Characteristic	Parameter
HV-8000 Control cabinet	1,Imported core accessories and mass flow-meter, full closed loop system, high-performance PLC control 2,Rugged design, Europe and the United States imported valves, pressure switches, flow switches, sensors,the quality is like Europe and the United States equipment. 3,Touch screen operation, intelligent automatic operation; 4,Process parameters on the touch screen panel at a glance; 5,One key operation, can realize the spraying process automation and real-time detection, 7 alarm prompt, can respond to the system fault immediately.	1,Program control: full closed-loop PLC control 2.Interface control: 12-inch touch screen 3.Flow control: mass flow controller 4. Input power: 5000W 5. Kerosene pressure: 1.2Mpa 6. Kerosene flow: 0~60L/h 7. Oxygen pressure: 1.6mpa 8. Oxygen flow: 0~60m3/h 9. Carrier gas pressure: 0.1~0.3Mpa 10. Carrier gas flow: 3~30L/min 11. Main parts origin: Germany, America, Japan, Italy

Component	Characteristic	Parameter
D-3000 Powder feeder	The powder feeder is a high precision powder feeding mechanism which outputs via metering panel, uses patented feeding valve, with powder evenly output, having higher precision compared with the conveying modes of scraper type, screw and vibration, etc.;    Adopting small-flow nitrogen or argon gas as feeding gas, which, together with powder that arrives at powder outlet with rotation of feeding panel on the bottom, enters the spray gun, to save more gas than traditional mesohigh powder feeder.    Compared with the traditional double barrel type powder feeder, the metering disc type powder feeder is more fine and the powder particle size range is wider.	Feeding mode:metering panel 2. Cleaning method: barrel body turnover 3. Powder drying function: built-in heater 4. Powder cylinder mode: single cylinder type 5, self-cleaning function: yes 6,Volume of powder storing barrel:3.5L 7,Feeding gas: Nitrogen,argon 8,Pressure of feeding gas: 0.15-0.3Mpa 9,The carrier gas flow rate:0~15L/min 10Feeding speed:0~220g/min 11Feeding precision:±1% 12,Powder size :5~150μm

 

Characteristics and advantages of HV-80-JP supersonic flame spraying system

1, Solid cabinet design, fuel flow control area, pressure display area, electronic control area are modular layout, panel clear and easy to operate.
2. All imported valves, pressure switches, flow switches and sensors from Europe and America are of the same quality as those from Europe and America
3, The use of Japanese mitsubishi high-performance PLC control, after ignition automatically maintain oxygen and fuel, carrier gas flow output.
4. All the internal fuel, oxygen, carrier gas and cooling water connected on the equipment have the detection function to ensure that all preparation processes can be fully tested before ignition.
5. Monitor the running status of the equipment in real time. Once any part is found to be operating beyond the safe range, the whole system will stop sharply, send an alarm and provide fault information.
6. The equipment starts and stops automatically under the control of PLC, which reduces the possibility of operator's misoperation.
7. Communication interface is set up inside the equipment to control the operation of peripheral devices.
8. Signal shielding measures are adopted to protect peripheral devices from electromagnetic interference during high frequency arc ignition.
 

In recent years, with the rapid development of China's petrochemical industry, China's own and the introduction of large complete sets of equipment to increase, and its matching valve demand increased. Valve is the main part in industrial pipeline. Whether it is good or bad and whether the choice is reasonable. It is very important for safe and economical operation of industrial pipeline system. Due to the pipeline delivery of mind is different. The function of various valves is not the same, so there are many types of valves.
Erosion corrosion wear is the phenomenon of metal damage caused by high-speed relative movement between metal surface and corrosive fluid, and is the result of the interaction between erosion corrosion and wear of materials. Metal parts in contact with corrosive media suffer serious erosion corrosion wear caused by liquid-solid two-phase flow, resulting in component failure or equipment scrap. We usually use the domestic valve in use process may be long in the acid, alkali, salt and sediment state of medium or high temperature corrosion, withstand strong corrosion and scouring, at the same time there are density than the pressure under the action of the seal between the friction and wear, its are harsh working environment, causing the untight seal leakage flow, the leakage flow serious when, in turn, increase wear and tear, This creates a vicious cycle in which wear and leakage negatively affect each other. Working under the condition of erosion and corrosion interaction, the existing domestic wear-resistant valves have low service life and poor sealing performance, resulting in frequent replacement. The service life of domestic valves is generally 3-6 months, which will cause great losses to the factory production. This not only wasted a lot of manpower and material resources, but also caused greater economic loss during the replacement process. So more time in the key parts we have to use imported wear-resistant valves, although the life of imported wear-resistant valves is generally only 2-3 times that of domestic wear-resistant valves, but the price is far higher than domestic wear-resistant valves.
Our company has kept the valve technology communication and exchange with foreign enterprises all the year round, so in the wear-resistant valve spraying wear-resistant corrosion resistant technology has a mature technical program, can help customers to achieve mass processing of various wear-resistant valve of all kinds of long life coating.