HV-8000 supersonic flame spraying system main control cabinet
Brief introduction:
Powerful multi-functional interface of the HV-8000
 |
The HV-8000 control cabinet is a fully closed loop control system where all process gases and powder carrier gases are digitally managed using advanced mass flow meters to ensure high accuracy and repeatability in the spraying process. Aviation kerosene is PID adjustment through servo motor and needle valve, this system uses PLC control system operation, the operator can easily enter the relevant process parameters or call the previous spraying formula through the graphical man-machine interface, the system can record and monitor the whole process of spraying in real time.
|
HV-8000 comprehensive information control interface
|
The HV-8000 control cabinet is the hub for controlling all spraying processes. Built-in high-end PLC and various software, responsible for the complete control process. All important process parameters are closed loop controlled to ensure maximum process stability and repeatability. As a man-machine interface, the touch screen is used to input spraying process parameters and display spraying status. The operation of the system is monitored in real-time. |
HV-8000 process storage, call interface
|
The system can store 8,000 spray formulas, which can be called directly to the control panel when in use. Through the main operating interface of the touch screen, users can easily store, call and modify the spray formula. |
On the touch screen, the user can set all the process parameters, and make all the spray parameters at a glance. For different types of guns, the system built-in PLC presets the ignition, parameter climb and power limit parameters, which can avoid the burning of gun parts due to the wrong setting of parameters.
The HV-8000 control cabinet also has a self-diagnostic function to monitor equipment flow, pressure and sensor operating status. Once the alarm occurs, the system will automatically stop the gun, the touch screen interface will alarm, the operator can know the source of the alarm by viewing the alarm page, so as to know the cause of the failure. All alarms automatically keep a history of the trigger reason, time, date, etc., which helps the operator understand the condition of the equipment.
HV-8000 control cabinet can control and monitor all peripheral equipment, when the peripheral equipment, dust collector, chiller does not start, the system does not allow ignition, to ensure the safety of the spray gun and spray room, when the robot, dust collector, chiller failure, will immediately stop the spray gun.
The HV-8000 system has a standby function, that is, if the spraying operation needs to be stopped for a short time for some reason during the spraying process, the device can enter the standby state by pressing the "standby" button. In the standby state, the gun still remains fired, but all water and electricity are in the minimum consumption required to maintain the ignition. Once it is necessary to resume normal spraying work, press the "rise to setting" button again to release the standby state, and the process parameters will return to the set value and enter the normal spraying state. This function is to avoid the loss of gun components such as nozzles and combustion chambers caused by repeated shutdowns during spraying operations.
Audited Supplier 
){kind=link}