Mixer Wear-Resistant Coating Processing High Velocity Oxygen Fuel System Hvof Thermal Spray Equipment Tungsten Carbide Wc-Co Coating

• Customization: Available
• Type: Coating Production Line
• Coating: Powder Coating
• Model NO.: HV-80-JP
• Substrate: Steel
• Certification: CE, ISO
• Condition: New
• Control Type: PLC Control
• Input Power: 5000W
• .Kerosene Pressure/Flow: 1.2MPa 0~60L/H
• Oxygen Pressure/Flow: 1.6mpat0~40m/H
• Transport Package: Wood
• Specification: powder feeder, spray gun and control cabinet
• Trademark: Lijia
• Origin: Zhengzhou, China
• HS Code: 8424899990
• Production Capacity: 100/Year

Product Description

Component	Characteristic	Parameter
HV-80-JP Control cabinet	1 Firm design, modular layout and high performance imported PLC control  make operation safe and convenient as well as maintenance free.  ; 2 Adopting valve, flow switch, pressure switch and sensor entirely imported from Euroamerica with the same quality of those of Euroamerican equipment;   3 Processing parameters are displayed on panel, clear at a glance; 4 Combustion chamber pressure,  oxygen pressure, oil pressure and water temperature are monitored in real time;   5 Able to be operated by one touch, simple and rapid, with 7 prompts of security monitoring;   6 Core parts are all of imported brands to guarantee stable and accurate running of equipment.	1,Control type:PLC control 2,Input power: 5000W 3.Kerosene pressure/flow:1.2Mpa  0~60L/h 4.Oxygen pressure/flow:1.6Mpa 0~40m/h 5.Carrier gas pressure/flow:0.1~0.3Mpa  3~15L/min 9:Main parts origin: Germany, the United States, Japan, Italy

Component	Characteristic	Parameter
D-3000 Powder feeder	The powder feeder is a high precision powder feeding mechanism which outputs via metering panel, uses patented feeding valve, with powder evenly output, having higher precision compared with the conveying modes of scraper type, screw and vibration, etc.;    Adopting small-flow nitrogen or argon gas as feeding gas, which, together with powder that arrives at powder outlet with rotation of feeding panel on the bottom, enters the spray gun, to save more gas than traditional mesohigh powder feeder.    Compared with the traditional double barrel type powder feeder, the metering disc type powder feeder is more fine and the powder particle size range is wider.	Feeding mode:metering panel 2. Cleaning method: barrel body turnover 3. Powder drying function: built-in heater 4. Powder cylinder mode: single cylinder type 5, self-cleaning function: yes 6,Volume of powder storing barrel:3.5L 7,Feeding gas: Nitrogen,argon 8,Pressure of feeding gas: 0.15-0.3Mpa 9,The carrier gas flow rate:0~15L/min 10Feeding speed:0~220g/min 11Feeding precision:±1% 12,Powder size :5~150μm

 

Characteristics and advantages of HV-80-JP supersonic flame spraying system

1, Solid cabinet design, fuel flow control area, pressure display area, electronic control area are modular layout, panel clear and easy to operate.
2. All imported valves, pressure switches, flow switches and sensors from Europe and America are of the same quality as those from Europe and America
3, The use of Japanese mitsubishi high-performance PLC control, after ignition automatically maintain oxygen and fuel, carrier gas flow output.
4. All the internal fuel, oxygen, carrier gas and cooling water connected on the equipment have the detection function to ensure that all preparation processes can be fully tested before ignition.
5. Monitor the running status of the equipment in real time. Once any part is found to be operating beyond the safe range, the whole system will stop sharply, send an alarm and provide fault information.
6. The equipment starts and stops automatically under the control of PLC, which reduces the possibility of operator's misoperation.
7. Communication interface is set up inside the equipment to control the operation of peripheral devices.
8. Signal shielding measures are adopted to protect peripheral devices from electromagnetic interference during high frequency arc ignition.
 

 

Our company has accumulated perfect solutions for the introduction of iron ion isolation and wear resistance reduction impurity in cathode materials and battery production equipment, and has greatly improved the self-discharge performance of cathode materials after processing into finished batteries.

In the production process of battery materials, there must be no contact with iron components. Many companies have conical barrels and conical spiral mixers, two of which are made of stainless steel, but the battery powder will continue to be mixed during the mixing process. After working for a long time, both the cylinder and the spiral blades will be greatly abraded. The stainless steel impurities that have been worn down are mixed in the battery powder. The iron content in the stainless steel is up to 70%, which is very serious for the formation of battery powder. Pollution. In the past, equipment generally used Teflon coating, which had short life and poor high temperature resistance, and required regular maintenance. Our company uses wear-resistant tungsten carbide coating to solve such problems.
     
Our company adopts the whole tungsten carbide spraying treatment for the high-speed mixer, the whole machine, the parts (paddle, tank body, discharge port) and the material contact part in the cathode material production equipment.
The overall spraying treatment is carried out for the double-cone spiral mixer (screw, tank body) to solve the introduction of elemental impurities such as sodium borosilicate and sodium borosilicate into the cathode material of the glass fiber reinforced plastic coating in the past.
After processing the stirring blade of the battery mixing equipment, the introduction of impurities from the stainless steel wear agent is reduced, and the self-discharge ratio of the battery is greatly reduced.