Hvof Metal Spray Textile Roll Coating Wear-Resistant Roll Coating

Product Description

                                      HV-8000H Supersonic Flame Spraying Equipment Introduction
The HV-8000H supersonic flame spraying developed by Zhengzhou Lijia is a new type of HVOF system that uses aviation grade kerosene as fuel. The basic principle of it is to fully atomize the kerosene with the combustion aid oxygen through the atomizing nozzle to form a combustible mixture and enter the combustion chamber. The ignition system ignites the high-temperature and high-pressure gas, which is ignited and burned by the Laval nozzle to form a high-temperature and high-pressure supersonic flame flow. The powder feeding system sends the powder material from the low-pressure area into the flame flow, and after heating and accelerating, it is sprayed onto the surface of the work piece to form a high-quality coating.

HV-8000H Supersonic flame inner hole spraying control cabinet

HV-8000H equipment panel settings are all operated through the touch screen, with 12 powerful functional modules that are internationally leading, all kinds of common operations, information display and fault alarms are readily available, and are very in line with the user's operating habits, simple and easy to use, stable quality.

Project	Parameter
program control	Full closed-loop PLC control
Interface control	12 inch touch screen
Gas flow control	World renowned brand quality flow controller
Input power	5000W
Kerosene pressure	1.2-1.5Mpa
Kerosene flow rate	0~12GPH
Oxygen pressure	1.6-2.0Mpa
Oxygen flow rate	0~2300SCFH
Hydrogen pressure	1.5Mpa
Hydrogen flow rate	0~100L/min
Carrier gas pressure	1.2Mpa
Carrier gas flow rate	3~30L/min
Nitrogen pressure	1.6Mpa
Nitrogen flow rate	10~100L/min
Origin of accessories	Germany, United States, Japan, Italy

        HV-8000H Multifunctional interface                             HV-8000H Control Interface                          HV-8000H Process storage, call interface   

HV-80S Kerosene supersonic flame spray gun

Item	Parameter
Flame speed	2000m/s
flame temperature	3000ºC
Spray rate	0-9.6kg/h(WC-CO)
Powder particle velocity	600-1100m/s
porosity	≤1%
Coating bonding strength	≥70Mpa
Spray powder particle size	-30+5μm,-38+10μm,-45+15μm
Cooling method	Hydro-cooling
Cooling water flow rate	2.3m³/h
Size/Weight	450*85*170mm, 4.5kg

C-1000DA dual tube weighing powder feeder

Project	Parameter
Powder delivery method	Scraper disc
Quantity of powder delivery tubes	2 units
Operation method	PLC+touch screen
Gas control mode	European and American imported quality flow controller
Powder cleaning method	Bucket body flip type
Powder cylinder mode	Single tube type
Self cleaning function	have
Single powder cylinder capacity	3L
Sending powder gas	nitrogen or argon
Powder delivery air pressure	0.15-0.5Mpa
Carrier gas flow rate	0~15L/min
Powder delivery speed	0~280g/min
Powder delivery accuracy	±1%
Powder size	5~150μm

KM-80 Oil pump storage system

Project	Parameter
Input power supply	AC380/3P/50Hz±5%
Input power	1.5kw
Volume	200L
Kerosene management	Circulating conveying+stable oil presser(1.3Mpa)
Supporting components	Oil inlet and outlet pipes
Oil pump motor and oil pump head	World renowned brands
Oil pump size/weight Fuel tank size/weight	810*510*460mm, 55kg                      510*450*1170mm, 28kg

Service Plan

1. Technical data provision

1. A set of equipment user manual.
2. Equipment fault analysis and troubleshooting guidelines.

 

1. Warranty period

The shelf life is 12 months after the equipment passes the acceptance inspection. The date of passing the acceptance shall be calculated from the date of signing the acceptance report by both parties. Human error includes: equipment damage caused by incorrect installation/operation is not guaranteed (our technicians will cooperate with the buyer to solve the problem).

1. Equipment maintenance and spare parts supply after the warranty period

Zhengzhou Lijia will continue to provide technical support and spare parts supply to customers after the warranty period, ensuring a response to customer equipment troubleshooting requests within 24 hours, and will also provide equipment spare parts at a low price.

1. Buyer's on-site installation   

If it is necessary to install in the workshop of the Buyer's country, the Buyer shall be responsible for preparing the surrounding facilities necessary for equipment operation and providing corresponding services before the arrival of the equipment, including circuit preparation, clean compressed air and pipelines, fuel, gas and pipelines, installation tools, water pipes and handling labor. The installation time largely depends on the buyer's on-site preparation and assistance to the installation personnel.

1. Training includes:

1. System operation
2. System maintenance
3. Special operation training (service upgrade)