HD-8000 Supersonic Flame Spraying Equipment Introduction
The working principle of HD-8000 is to fully atomize kerosene with the combustion aid oxygen through the atomizing nozzle to form a combustible mixture gas. Under the action of force, the gas enters the combustion chamber. The ignition system ignites it and ignites it through the Laval nozzle to form a high-temperature and high-pressure supersonic flame flow. The powder feeding system sends the powder material from the low-pressure area into the flame flow channel, and after heating and accelerating, it sprays it onto the surface of the workpiece to form a high-quality coating.
HD-8000 Four advantages mainly:
- The fuel is aviation grade kerosene, and the combustion aid is oxygen. At present, this combustion mode is recognized internationally as the safest combustion mode;
- The spray gun structure is designed based on the principle of a rocket generator, with a maximum combustion chamber pressure of 150PSI and a flame flow velocity of over 2000m/s. The output power is large and can be adjusted steplessly;
- The spray gun adopts radial powder feeding, which is a new injection method that allows the powder to dissolve well and distribute evenly throughout the flame, improving coverage efficiency and coating quality;
- The fuel flow rate of the system adopts a fully closed-loop design, modular design, high-performance PLC control, and safe and easy operation;
Figure: HV-80S Kerosene supersonic flame spray gun
| Item |
Parameter
|
| Flame speed |
2000m/s |
| flame temperature |
3000ºC |
| Spray rate |
0-9.6kg/h(WC-CO)
|
| Powder particle velocity |
600~1100m/s |
| porosity |
≤1% |
| Coating bonding strength |
≥70Mpa |
| Spray powder particle size |
-30+5μm,-38+10μm,-45+15μm |
| Cooling method |
Hydro-cooling |
| Cooling water flow rate |
2.3m³/h |
| Size/Weight |
450*85*170mm, 4.5kg |
HD-8000 Control Cabinet
|
HD-8000 Supersonic Flame Spraying Control Cabinet
|
| Item |
Parameter
|
| Input power supply |
AC380/3P/50Hz±5% |
| Input power |
5kw |
| control type |
Float flow meter+PLC+Touch screen control |
| Kerosene pressure |
1.2Mpa |
| Kerosene flow rate |
0-12GPH |
| Oxygen pressure |
1.6Mpa
|
| Oxygen flow rate |
0-2300SCFH |
| Carrier gas pressure |
0.1-1.2Mpa |
| Carrier gas flow rate |
3-15L/min |
| Place of origin of parts |
Germany, USA, Japan, Italy |
| Size/Weight |
810*750*1950mm, 175kg |
D-3000 powder feeder
|
D-3000 Supersonic flame spraying system powder feeder
|
| Item |
Parameter
|
| Input power supply |
AC220/2P/50Hz±5% |
| Input power |
0.5kw |
| Powder delivery method |
Metering disk |
| Powder cleaning method |
Barrel flipping type |
| Powder drying function |
Heater (optional) |
| Powder cylinder mode |
Single cylinder type |
| Self cleaning function |
Yes |
| Volume of powder storage cylinder |
3.5L |
| Powder feeding gas |
Nitrogen or argon |
| Powder feeding pressure |
0.15-0.3Mpa |
| Carrier gas flow rate |
3-15L/min |
| Powder feeding speed |
10-220g/min |
| Powder feeding accuracy |
±1% |
| Powder size |
5-150μm |
| Size/Weight |
710*390*1300mm, 75kg |
Audited Supplier 
){kind=link}