High Velocity Oxygen Fuel System Equipment Hvof Equipment Thermal Spray Equipment Surface Repair Coating Equipment Nickel-Chrome Coating Equipment

• After-sales Service: 1 Year
• Warranty: 1 Year
• Type: Coating Production Line
• Coating: Powder Coating
• Substrate: Steel
• Certification: CE, ISO
• Model NO.: HV-8000
• Condition: New
• Control Type: Full Closed-Loop PLC Control
• Input Power: 5000W
• Kerosene Pressure/Flow: 1.2MPa
• Oxygen Pressure/Flow: 1.6MPa
• Transport Package: Wood
• Specification: powder feeder, spray gun and control cabinet
• Trademark: Lijia
• Origin: Zhengzhou, China
• HS Code: 8424899990
• Production Capacity: 100/Year

Product Description

Component	Characteristic	Parameter
HV-8000 Control cabinet	1,Imported core accessories and mass flow-meter, full closed loop system, high-performance PLC control 2,Rugged design, Europe and the United States imported valves, pressure switches, flow switches, sensors,the quality is like Europe and the United States equipment. 3,Touch screen operation, intelligent automatic operation; 4,Process parameters on the touch screen panel at a glance; 5,One key operation, can realize the spraying process automation and real-time detection, 7 alarm prompt, can respond to the system fault immediately.	1,Program control: full closed-loop PLC control 2.Interface control: 12-inch touch screen 3.Flow control: mass flow controller 4. Input power: 5000W 5. Kerosene pressure: 1.2Mpa 6. Kerosene flow: 0~60L/h 7. Oxygen pressure: 1.6mpa 8. Oxygen flow: 0~60m3/h 9. Carrier gas pressure: 0.1~0.3Mpa 10. Carrier gas flow: 3~30L/min 11. Main parts origin: Germany, America, Japan, Italy

Component	Characteristic	Parameter
D-3000 Powder feeder	The powder feeder is a high precision powder feeding mechanism which outputs via metering panel, uses patented feeding valve, with powder evenly output, having higher precision compared with the conveying modes of scraper type, screw and vibration, etc.;    Adopting small-flow nitrogen or argon gas as feeding gas, which, together with powder that arrives at powder outlet with rotation of feeding panel on the bottom, enters the spray gun, to save more gas than traditional mesohigh powder feeder.    Compared with the traditional double barrel type powder feeder, the metering disc type powder feeder is more fine and the powder particle size range is wider.	Feeding mode:metering panel 2. Cleaning method: barrel body turnover 3. Powder drying function: built-in heater 4. Powder cylinder mode: single cylinder type 5, self-cleaning function: yes 6,Volume of powder storing barrel:3.5L 7,Feeding gas: Nitrogen,argon 8,Pressure of feeding gas: 0.15-0.3Mpa 9,The carrier gas flow rate:0~15L/min 10Feeding speed:0~220g/min 11Feeding precision:±1% 12,Powder size :5~150μm

 

Characteristics and advantages of HV-80-JP supersonic flame spraying system

1, Solid cabinet design, fuel flow control area, pressure display area, electronic control area are modular layout, panel clear and easy to operate.
2. All imported valves, pressure switches, flow switches and sensors from Europe and America are of the same quality as those from Europe and America
3, The use of Japanese mitsubishi high-performance PLC control, after ignition automatically maintain oxygen and fuel, carrier gas flow output.
4. All the internal fuel, oxygen, carrier gas and cooling water connected on the equipment have the detection function to ensure that all preparation processes can be fully tested before ignition.
5. Monitor the running status of the equipment in real time. Once any part is found to be operating beyond the safe range, the whole system will stop sharply, send an alarm and provide fault information.
6. The equipment starts and stops automatically under the control of PLC, which reduces the possibility of operator's misoperation.
7. Communication interface is set up inside the equipment to control the operation of peripheral devices.
8. Signal shielding measures are adopted to protect peripheral devices from electromagnetic interference during high frequency arc ignition.
 

Science says, remanufacturing is a high technology for waste product repair and transform the industry, it is for damage or to scrap parts, in the performance based on the analysis of the failure analysis, and evaluation of life, etc, for remanufacturing engineering design, adopt a series of advanced manufacturing technology, make the remanufacturing quality of the products meet or exceed the new product.
Remanufacturing engineering is a systematic engineering that considers the whole life cycle management of product parts as a whole. Remanufacturing and molding technology (including high and new surface engineering technology and other processing technology) is adopted to restore the size, shape and performance of the parts and form the remanufactured products by using the original parts and components. Mainly include on the new product to use after a remanufacturing old parts, and the long-term use in product performance, reliability and life of the components in the process of recovery and improve by remanufacturing, such as to make the product or equipment in the minimum pollution to the environment, resource utilization, the highest investment under the condition of minimum cost to achieve the best performance requirements. Remanufacturing engineering is considered as the supplement and development of advanced manufacturing technology and a new industry with great potential in the 21st century.
Remanufacturing is to form new products after the whole product is scrapped by adopting advanced technological means. Remanufacturing process can not only improve the service life of the product, but also influence the design of the product, and finally achieve the minimum cost of the whole life cycle of the product, and ensure that the product creates the maximum benefit. In addition, remanufacturing although there are similar with the traditional recycling environmental targets, but recycling, such as molten steel and dissolve paper mainly material reuse, and components for remanufacturing technology is a kind of functional recovery technique, can get parts from the waste products of the highest value, even for higher performance of remanufacturing products. Thus it can be seen that remanufacturing is the second investment in the product, but also an important measure to make the product appreciate.
Through thermal spraying, existing old parts can be added and remanufactured to restore their size. If the size is restored with excellent coating performance, the repaired parts will last longer than the original new parts.