Insulating Conductive Coating Equipment Hvof Equipment High Velocity Oxygen Equipment Thermal Spray Equipment Tungsten Carbide Coating Equipment

• Warranty: 1 Year
• Type: Coating Production Line
• Coating: Powder Coating
• Substrate: Steel
• Certification: CE, ISO
• Condition: New
• Model NO.: HVAF
• Control Type: Full Closed-Loop PLC Control
• Porosity: Between 0.1 and 0.3 Percent
• High Deposition Efficiency: 5-30 M,15-45 M (Hvof Mode)
• Powder Feeding Efficiency: 0.26kg/H
• Fuel: Propane and Compressed Air
• Transport Package: Wood
• Specification: powder feeder, spray gun and control cabinet
• Trademark: Lijia
• Origin: Zhengzhou, China
• HS Code: 8424899990
• Production Capacity: 100/Year

Product Description

Component	Characteristic	Parameter
HVAF Control cabinet	1. Imported core parts, full closed-loop system, Mitsubishi high performance PLC control 2. Solid design, pressure sensor and solenoid valve all imported from Europe and America, the quality is the same as the European and American equipment. 3. Touch screen operation, intelligent automatic operation; 4. Process parameters are clear on the touch screen panel; 5. One-key operation can realize automatic and real-time detection of spraying process, and multiple alarm prompts can make immediate response to system failure.	1. Program control: full closed-loop PLC control 2. Interface control: 15-inch touch screen 3. Flow control: mass flow controller + electric pressure regulating valve 4. Propane pressure: 1.0mpa 5. Air pressure: 1.1Mpa 6. Carrier gas pressure: 1.0mpa 7. Propane flow rate: 0~50kg/h 8. Air flow rate: 400-600m /h 9. Carrier gas flow: 0~100L/min 10. Main parts producing areas: America, Japan and Italy

Component	Characteristic	Parameter
E-2000 Powder feeder	1. The powder feeder is a high-precision powder feeding mechanism based on the principle of toothed dial with vibration structure and gravity falling, with uniform powder output and wide particle size range. 2. After the top cover is sealed, the powder condition in the powder cylinder can be clearly seen through the visual transparent observation window on the powder cylinder. 3. Nitrogen or argon with small flow is used as powder gas. The powder is rotated to the powder outlet along with the powder tray at the bottom and enters into the spray gun together with the powder gas. 4. Adopting the latest international turnover structure, it is convenient to clean the powder, which can be discharged from the lower mouth, or can be poured from the barrel body.	1. Powder feeding: toothed dial 2. Cleaning method: barrel body flip 3. Volume of powder storage tube :2L 4. Powder feed gas: nitrogen 5. Powder feeding air pressure: 0.15-1.2mpa 6. Powder feeding speed :0~500g/min 7. Powder feeding accuracy :±1% 8. Powder size :1~150 m

 

Item	Coating properties (WC as an example)	Other features (WC as an example)
LA2 supersonic flamethrower	1. Hardness: 1050-1400HV0.3 2. Porosity: less than 0.5% 3. The coating generates residual compressive stress 4. The oxide content in the coating can be ignored	1. Powder size: -30+5 m, -30+10 m 2. Particle velocity: about 935m/s 3. Deposition rate: 40-55% 4.Maximum spraying rate: 30kg/h
LA3 supersonic flamethrower	1. Hardness:1050-1600HV0.3 2. Porosity: less than 0.5% 3. The coating generates residual compressive stress 4. The oxide content in the coating can be ignored	1. Powder size: -30+5 m, -30+10 m, -40+15 m 2. Particle velocity: about 935m/s 3. Deposition rate: 40-62% 4. Maximum spraying rate: 35kg/h

 

Insulating and conductive coatings are increasingly widely used in aerospace, automotive, electric power, semiconductor, flat panel display and other fields. Aluminum oxide, zirconia, yttrium oxide and other insulating coatings can be sprayed on the metal surface. Meanwhile, conductive coatings can also be sprayed on insulating materials, such as aluminum and copper coatings.

Our company in the cathode material and battery production equipment iron ion isolation and wear reduction of impurities into the accumulation of perfect solutions, and the cathode material processing into finished battery greatly improved its self-discharge performance.

Battery material production process, there shall be no contact with the iron component, a lot of conical cylinder and conical spiral mixer, two of the mixing screw is made of stainless steel body, but the powder in the process of mixing with batteries, constantly friction cylinder, working long hours, barrel and screw blade will appear a lot of wear and wear down the stainless steel impurities mixed in battery powder, Iron content in stainless steel is up to 70%, which causes serious pollution to battery powder. In the past,  coating was generally used for equipment, which needed regular maintenance due to its short life and poor high temperature resistance. However, our company used wear-resistant tungsten carbide coating to solve such problems.

Our company adopts integral tungsten carbide spray treatment for the contact parts of high speed mixer, complete machine, accessories (blade, tank, discharge port) and materials in the cathode material production equipment.
For the double cone screw mixer (screw, tank) overall spraying treatment to solve the previous FRP coating into the cathode material of sodium borosilicate and other element impurities.
After the treatment of the stirring paddle of the battery mixing equipment, the impurity introduction of the stainless steel wear agent was reduced, and the self-discharge ratio of the battery was greatly reduced.